© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.36. Learn Command
This page describes the syntax and how to use the learn command.
To go to the learn command, press Speed on the console.
Learn is in the command line now.
Learn
Description
With the learn command you set the speed by tapping for:
Chaser
Effects
Master rate
Master speed
Syntax
Set the speed of objects by tapping.
Learn
Examples
Here are a few examples how you can use the learn command.
Example 1
Let´s assume, you will set the speed of a chaser.
Press and hold Speed (= Learn) and press the executor button of the chaser several times in that speed you like
to have it.
The chaser learns the speed of the tapping of the executor button.
Example 2
Let´s assume, you will set the speed of an effect.
Press and hold Speed (= Learn) and press the executor button of the effect several times in that speed you like
to have it.
The effect learns the speed of the tapping of the executor button.
To Next Page
Loading...
