© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
5.17. Exec (Executor) key
Pressing the Exec key will open the Executors Pool view. Here you can directly access all your executors. You
can move cue lists around or make copies.
The key can also be used to specify a specific executor - If you are using it as a command (Executor Command).
E.g. you want to run cue number 4 on executor number 6. here's the keys you need to press (using only keys):
Goto 4 Exec 6 Please
If you want to move executor 1 at executor 6:
Move Exec 1 At 6 Please
If you want to move the main executor (number 0.1.1) to executor 4:
Move Exec 0 . 1 . 1 At 4 Please
Advanced Functionality
Pressing the key and then pressing the Exec key will give you the Virtual playback view on the right screen.
Here you can have access to the playbacks/executors on the wings even tough you don't physically have the
wings.
To Next Page
Loading...
