© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.35. Label Command
This page describes the syntax and how to use the label command.
To go to the label command, press Label on the console.
Description
With the label command, you can label e.g.
fixtures in the fixtures sheet view
groups in the groups pool
presets in the presets pool
Syntax
1. Label a fixture.
Label Fixture 1
2. Label a group.
Label Group 1
3. Label a preset.
Label Preset
Example 1
Let´s assume, you will label the fixtures 1 thru 10 as Mac700 with a consecutive number at the end, in the fixtures
sheet view.
There are two ways to to this.
a) Press Label Fixture 1 Thru 10 Please .
b) Press Label and select the fixtures 1 thru 10 in the fixtures view.
The Enter Name for Window opens.
Enter "Mac700 1".
Fixture 1 Thru 10 are labeled as Mac700 with a consecutive number at the end, in the fixtures sheet view.
To Next Page
Loading...
