© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
5.18. [Executor Flash] key
The (called Executor Flash) key under the fader executors can have different functions. The default function
is the Flash function. This will activate the first cue, ignoring the cue times, and keep the master level to full as
long as the button is pressed.
You can change the function on this key, by using the Change Functions of Executor Buttons window. You reach
this page by pressing the lower area on the screen above your executor, then press the tool icon in the title bar in
the window that opens. Then you get the Change Functions of Executor Buttons window. Follow the link above to
read about the different functions a key can have.
Related links
Change Functions of Executor Buttons window
What is Executors
To Next Page
Loading...
