MA lighting dot2 - Edit Command

To Next Page

To Previous Page

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

7.18. Edit Command

This page describes the syntax and how to use the Edit command.

To go to the Edit command press Edit on the console.

Description

With the Edit command, you can edit

open the cues view of an executor

cues

presets

groups

As long as you are in the edit mode, the Edit key is flashing.

To update the edited values, press Update Please .

To leave the edit mode, press Esc .

Syntax

1. Open the cues view of an executor.

Edit Executor 1

2. Edit a cue.

Edit Executor 1 Cue 2

3. Edit a preset.

Edit Preset 1

4. Edit a group.

Edit Group 1

Example 1

Let´s assume, you will open the cues view of executor 1 on screen 1.

There are two ways to do this:

479 of 614

dot2 User Manual - Commands

Version 1.5 – 2018-11-29

English

Other manuals for MA lighting dot2