© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
6.30. Focus Preset Type View
To go to the Focus Preset Type View, tap Focus in the Preset Type Bar.
- or -
Press and hold and press 6 , for preset type 6 (= Focus).
The focus preset type view is only active if the selected fixture type has focus attributes.
The focus preset type view is fragmented in the Focus/Zoom View tab and the Raw Focus View (depending on
the fixture type).
Important:
The focus sliders works absolute. A tap on a focus slider sets a new focus value and does not follow
the already set focus values.
The respective encoders works relative to the already set focus values.
To open the focus effects view at screen 1, tap at in the title bar.
If an effect is running on a selected fixture, the focus preset type view change into an effect mode and get a blue
effect mode title bar.
Focus/Zoom View
The focus/zoom view is the first tab in the focus preset type view.
With the focus slider, you control the focus of the projection.
To Next Page
Loading...
