© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.59. Solo Command
To enter the Solo command in the command line, press + Highlt or type Solo or the shortcut So in the
command line.
Description
The Solo command forces the dimmer attributes of all unselected fixtures to zero. Only the selected fixtures will
have an intensity output.
This function is often used to focus gobos or to position fixtures.
Hint:
It is possible to protect fixtures against Solo. To do so disable React to Master in the Patch and Fixture
Schedule.
For more information on React to Master see the Patch and Fixture Schedule.
If Solo is on, Highlt starts to blink and the Solo symbol is displayed in the message view .
Important:
If only a few fixtures are selected, the event location will go black.
Syntax
Solo
Solo On
Solo Off
Example
Turn Solo on.
[Channel]> Solo On
To Next Page
Loading...
