© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.61. Store Command
This page describes the syntax and how to use the Store command.
To go to the Store command, press Store on the console.
Description
With the Store command, you can store e.g.
a cue on an executor
a selection of fixtures as a group in the groups view
an active value in a preset pool
a master speed or master rate fader on an executor
For more information about cues, refer to How to work with Cues?
Syntax
Store a cue on an executor.
Store Cue 1 Executor 1.1
Store a selection of fixtures as a group in the groups view.
Store Group 1
Store an active dimmer value as dimmer preset in the dimmer presets pool.
Store Preset 1.1
Store a master speed fader on an executor.
Store Rate Executor 1.3
Examples
To Next Page
Loading...
