© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
6.22. Edit Cue Number(s) Window
To go to the Edit Cue Number(s) Window, open the Cues View and press and hold the cell with the cue number of
the respective cue.
In this window, you edit the cue numbers.
From Cue:
Select the number of the cue from which you like to start with, e.g. 1.
To Cue:
Select the number of the cue till which you like to end with, e.g. 10
It is not possible to renumber cues in addition with a cue position change.
If you renumber a cue, the cue have to stay in its position in the cue list.
If you want to move a cue, e.g. cue 1 in a cue list of 10 cues, to cue 11 use the move command.
New Number:
Select the new start cue number, e.g 1.1.
Step Width:
Select the step width of the cue numbers, e.g 0.1.
Renumber:
Tap to apply the changes and go back to the cues view.
To Next Page
Loading...
