© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
6.13. Choose Update Method Window
If you try to update a cue in a cue list, the console ask to choose the update method.
Figure 1: Choose Update Method Window
There are two update modes available.
To leave the window, tap Esc in the title bar or press Esc on the console.
The update process is canceled.
For more information about Update, refer to Update command and Update key.
The following tables explains the functions of the two methods on an example.
Initial Situation
Cue list Fixture 1 Fixture 2 Fixture 3
Cue 1 100 % 0 % 0 %
Cue 2 100 % tracked value 50 % 0 % tracked value
Cue 3 100 % tracked value 50 % tracked value 25 %
Normal Update
Cue list Fixture 1 Fixture 2 Fixture 3
Cue 1 100 % 0 % 0 %
Cue 2 Update 30 % 30 % 30 %
Cue 3 30 % tracked value 30 % tracked value 25 %
To Next Page
Loading...
