© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Create Second Cue
Let´s assume, you will create a cue list on the main executor.
Figure 7: Cue list on main executor
1. Press Store and tap on the main executor in the executor bar view.
2. Tap Create second cue .
The current programmer values are stored as a second cue on the main executor.
Encoder Bar Functions
Figure 8: Encoder bar functions - choose store method
Select:
To select a function, turn the encoder left or right.
To confirm a selected function, press or tap the encoder.
To Next Page
Loading...
