© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
7.66. Toggle Command
This page describes the syntax and how to use the toggle command.
To go to the toggle command, press Toggle on the console.
Description
With the toggle command, you toggle between status on and off depending on the current status.
If the current status of the executor is off, the toggle will make it on, and turned.
Toggle is the default function on all executor buttons.
Syntax
Toggle executor 1.
Toggle Executor 1
Example
Let´s assume you will toggle the executor 1.
There are three ways to do this:
a) Press Toggle and then the respective executor button .
b) Press Toggle Exec 1 Please .
c) Press Toggle and then the respective executor in the executor bar view.
The executor has the turned status.
Related Links
Toggle Key
Exec (Executor) Key
Please Key
Executor Bar View
To Next Page
Loading...
