© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
5.45. Oops key
The Oops key performs an undo for most things you do in the console.
E.g. if you have store the wrong cue, then you can press Oops and you'll no longer have the cue, but the values
are back in your programmer.
If you are in the process of typing a command and haven't executed it yet (by pressing Please ), then you can
use Oops as a backspace function.
To Next Page
Loading...
