© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
5.13. Edit key
The Edit key is used to edit the object you press after you've pressed the key.
If you press Please after you've pressed Edit, then you edit the current active cue on the main cue list.
You can edit all elements in a cue list.
Actually you can edit almost anything.
When using the onPC or having an external mouse connected, then you can right click the mouse to get
the edit function.
Most of the time you can press the encoder to get the edit function.
Related link
Edit Command
To Next Page
Loading...
