MA lighting dot2 - Page 135

© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
1
5.24. Go- key
The Go- key is used to execute a GoBack command on an executor. It will take you to the previous cue with the
cue timing. Press this key followed by any key associated with an executor.
Don't mistake this key with the big Go- key under the main executor faders - Read about it here.
Related link
GoBack Command
135 of 614
dot2 User Manual - Keys
Version 1.5 – 2018-11-29
English