© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Hint:
To apply values to the main executor, type only Exec in the command line without an executor
number.
Press Exec 1 At 50 Please .
The executor has now 50 %. This is the same as you would move the fader up to 50 %.
Example 5
Let´s assume, you will trigger executor 1 by a Go command.
Press the small Go + (=Go ) Exec 1 Please .
Executor 1 is triggered by a Go command. This is the same as your executor button is assigned with a Go
command.
To Next Page
Loading...
