© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Raw Beam View
The raw beam views are located after the prisma views.
In the raw beam view, you control the raw beam values in natural values (0-100) of the selected fixture type.
Encoder Bar Functions
The default encoder speed is without decimal place.
To change the encoder speed to slow, press the encoder key . The encoder speed is with decimal place.
To change the encoder speed to ultra slow, press and hold the key and press the encoder key . The
encoder speed equals one DMX step.
To select the value, turn the encoder left or right.
To open the calculator, press the encoder.
Related Links
Calculator
How to work with Presets?
What is Presets?
To Next Page
Loading...
