© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Important:
The control sliders works absolute. A tap on a control slider sets a new control value and does not
follow the already set control values.
The respective encoders works relative to the already set control values.
In the raw control view, you control the raw control channel values in natural values (0-100) of the selected
fixtures.
Encoder Bar Functions
The encoder bar is only visible in the raw control views.
It displays the respective raw channel depending on the selected slider.
To select the value, turn the encoder left or right.
To change the encoder speed to slow, press the encoder key .
To change the encoder speed to ultra slow, press and hold the key and press the encoder key .
To open the calculator, press the encoder.
Related Links
Preset Type Bar
What is a Preset?
How to work with Presets?
To Next Page
Loading...
