© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Programmer Time (Prog Time)
The Prog Time master is used to set a time on your programmer. This is very useful if you are running live shows
and are want to fade from one programmer value to another. When you move the fader up you get a value
between 0 and 10 seconds. The two keys associated with the executor can be used to turn the ProgT fader On or
Off. When it's On then all programmer values will use the time your fader is set to - including when you press
Clear .
When this is active, then you'll see a icon next to your command line on the right screen.
Related links
What are cues
What is the Programmer
Exec (Executor) Key
Executor Command
Executor Bar
Executor Pool
Magic Speed view
To Next Page
Loading...
