© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Figure 2: Red color indicator
Red color indicates that this value comes from the programmer and you can store it.
Figure 3: Red frame indicator
The red frame indicates this value comes from the programmer.
Raw Video Views
The raw video views are located after the smart view
Figure 4: Raw video view
Important:
The video sliders works absolute. A tap on a video slider sets a new video value and does not follow the
already set video values.
The respective encoders works relative to the already set video values.
In the raw video view, you control the raw video values in natural values (0-100) of the selected fixture type.
Encoder Bar Functions
To Next Page
Loading...
