© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Example 2
Let´s assume, you will set the attributes of the preset type position back to their default values, for the current
selected fixture.
There are three ways to do this:
a) Press + . (=Default) and tap Position in the preset type bar.
b) Press + . (=Default) + Preset (=PresetType) 2 Please .
c) Press + . (=Default) + Preset (=PresetType) and type in the command line Position with the
virtual keyboard.
The attributes of the preset type position are set to the default values, for all selected fixture.
The values are active in the programmer.
To Next Page
Loading...
