© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
b) Press Select and then tap on executor 1 in the executor bar view.
c) Press Select Exec 1 Please .
All fixtures stored on executor 1 are selected in the fixtures view.
Example 3
Let´s assume, you will select all fixtures from cue 1 on executor 1.
There are three ways to do this:
a) Press Select Cue 1 and then press the respective executor button e.g. .
b) Press Select Cue 1 and then tap on executor 1 in the executor bar view.
c) Press Select Cue 1 Exec 1 Please .
All fixtures from cue 1 on executor 1 are selected.
Related Links
Select Key
Fixtures View
Executor Bar View
DMX View
To Next Page
Loading...
