© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
b) Press Update Preset 1 Please .
Preset 1 is updated with the values in the programmer.
After an update, the fixtures sheet view displays the name of the preset.
To see the values stored in the preset, tap and hold the preset tile.
Example 4
Let´s assume, you will update cue 2 on executor 2 with the values in the programmer.
There are three ways to do this:
a) Press Update 2 (=Cue 2) Exec 2 Please .
b) Press Update 2 (=Cue 2) and press executor button 2 .
c) Press Update 2 (=Cue 2) and tap at executor 2 in the executor bar window.
If cue 2 on executor 2 is your current active cue, press Update and the executor button 2 .
Cue 2 of executor 2 is updated with the values in the programmer.
Related Links
Edit Command
Update Key
What is a Programmer?
Presets Pools View
To Next Page
Loading...
