New Show
Tapping the New Show button or using the encoder to select it and then shortly pressing the encoder open the
New Show window. Here you can create a new empty show. You type in the name of your new show and tap the
onscreen Enter (a left arrow with a 90 degree angle) or press the Please key.
Load Show
Tapping the Load Show button or using the encoder to select it and then shortly pressing the encoder opens
the Load Show window. Here you can choose the left encoder to select the drive from where you wish to load a
saved show. The options are the Internal, Demoshows or USB Drive (if connected). This list is also on the left side
of the screen. Demoshows are some shows that are made by MA. They can be used to play around with the
different functionality in the console without having to go through the process of programming an entire show.
Once you have selected the drive you can see a list of available saved shows in the right side of the screen. You
can use the right encoder to scroll through the list of shows. Shortly press the encoder to load the selected show.
Delete Show
To delete a show you'll also need to go into the Load Show menu. Here you can select the show you want to
delete and then you tap the trash can icon in the title bar at the top.
You can't delete the demo shows.
Save Show
Tapping the Save Show button or using the encoder to select it and then shortly pressing the encoder, saves
your current show using the already given name.
This can also be done when you are not in the Backup menu, by pressing the Backup key twice (like
double clicking a mouse).
Save Show as...
Tapping the Save Show as... button or using the encoder to select it and then shortly pressing the encoder
opens the Save Show as... window. Here you can save your current show under a different name. It looks a lot like
the New Show window. It basically an input field and the on screen keyboard.
You can exit the Backup menu by pressing the Backup key. the Esc key or the Esc in the upper left corner.
This takes you out of the Backup menu without making any changes.
In many of the windows opened by the backup menus you'll have an Ok button in the upper right corner. This
can be used to confirm your choice of name or selection of show file to load.
To Next Page
Loading...
