© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Create a Group Master
You can create group masters on your executor faders. These can be used to limit the output of the fixtures
stored on the group master. The limit works proportional. Meaning that if you have a group master at 100% with
your fixture at 50% and you then turn the master down to 50%, then your fixture will output 25%. If a fixture is
limited by one group master, then this will limit the output no matter if it's turned up by a different group master.
It's a lowest takes precedence principle.
1. Select the fixture(s) you want on your group master.
2. Press Store
3. Press Group
4. Press one of the keys associated with the executor where you want the group master.
Related links
What is Groups
Groups View
Group Key
To Next Page
Loading...
