Example: Triggering cue number 37.2 on executor 5 on page 1 (All Devices, All Format, and Exec.Page setting):
F0 7F Device ID 02 Command Format Command Data F7
F0 7F 7F 02 7F 01 33 37 2E 32 30 30 00 35 2E 31 F7
Same example but with a space separated executor and page:
F0 7F Device ID 02 Command Format Command Data F7
F0 7F 7F 02 7F 01 33 37 2E 32 30 30 00 35 20 31 F7
02 (Stop):
This is like hitting the pause button. Please read the section above for a better understanding of the hex cue
numbering system.
With the Default Only option there does not need to be any extra data since it is the executor that is paused.
Example: Stopping the default executor (All Devices, All Format, and Default Only setting):
F0 7F Device ID 02 Command Format Command Data F7
F0 7F 7F 02 7F 02 F7
If the station is transmitting MSC, then it will transmit a cue number 0.000. This is like sending a “pause running
cue” command.
If the settings are not Default Only but one of the two Exec/Page options, then the cue 0 also needs to be
transmitted.
Example: Stopping executor 5 on page 1 (All Devices, All Format, and Exec.Page setting):
F0 7F Device ID 02 Command Format Command Data F7
F0 7F 7F 02 7F 02 30 2E 30 30 30 00 35 2E 31 F7
03 (Resume):
This is the only way to continue a paused cue. The only difference between the Stop and Resume commands are
the “02” and “03”.
Example: Continuing the fade paused above (All Devices, All Format, and Exec.Page setting):
F0 7F Device ID 02 Command Format Command Data F7
F0 7F 7F 02 7F 03 30 2E 30 30 30 00 35 2E 31 F7
To Next Page
Loading...
