Siemens SINUMERIK 828D User Manual

Working in manual mode
4.2 Selecting a tool and spindle
Turning
112 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
4.2.3
Starting and stopping the spindle manually
Procedure
1.
Select the "T,S,M" softkey in the "JOG" mode.
2.
Select the desired spindle (e.g. S1) and enter the desired spindle speed
or cutting speed in the right
-hand entry field.
3.
If the machine has a gearbox for the spindle, set the gearing step.
4
Select a spindle direction of rotation (clockwise or counterclockwise) in
the
"Spindle M function" field.
5.
Press the <CYCLE START> key.
The spindle rotates.
6.
Select the "Stop" setting in the "Spindle M function" field.
Press the <CYCLE START> key.
The spindle stops.
Note
Changing the spindle speed
If you enter the speed in the "Spindle" field
while the spindle is rotating, the new speed is
applied.

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash