Siemens SINUMERIK 828D - Displaying PLC Properties

Edit PLC user program (828D only)
24.5 Displaying PLC properties
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
891
24.5
Displaying PLC properties
The following PLC properties can be displayed in the "SIMATIC LAD" window:
● Operating state
● Name of the PLC project
● PLC system version
● Cycle time
● Machining time of the PLC user program
Procedure
1.
Select the "Start
-up" operating area.
2.
Press the "PLC" softkey.
The l
adder diagram display opens and displays the PLC information.
3.
Press the "Reset mach.ti
me" softkey.
The data of the machining time is reset.