Siemens SINUMERIK 828D User Manual

Edit PLC user program (828D only)
24.13 Editing network properties
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
901
24.13
Editing network properties
You can edit the network properties of an INT block.
Network title and network comment
The title can have a maximum of three lines and 128 characters. The comment can have a
maximum of 100 lines and 4096 characters.
Procedure
1.
The ladder diagram display (LAD) is opened.
2.
Use the cursor keys to select th
e network that you want to edit.
3.
Press the <SELECT> key.
The "Network title / comment" w
indow opens and shows the title and a
possibly assigned comment for the selected network.
5.
Press the "Change" softkey.
The fields can be edited.
6.
Enter the changes and press the "OK" softkey to transfer the data to the
user program.

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash