Siemens SINUMERIK 828D - R Parameters

Machining the workpiece
5.11 Display and edit user variables
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
157
5.11.2
R parameters
R parameters (arithmetic parameters) are channel-specific variables that you can use within
a G code program. G code programs can read and write R parameters.
These values are retained after the controller is switched off.
Number of channel-specific R parameters
The number of channel-specific R parameters is defined in a machine data element.
Range: R0-R999 (dependent on machine data).
There are no gaps in the numbering within the range.
Machine manufacturer
Please refer t
o the machine manufacturer's specifications.
Procedure
1.
Select the "Parameter" operatin
g area.
2.
Press the "User variable" softkey.
3.
Press the "R variables" softkey.
The "R Parameters" window appears.
Delete R variables
1.
Press the ">>" and "Delete" softkeys.
The "Delete R parameters" window appears.
2.
Enter the R parameter(s) whose channel
-specific values you would like
to delete and press the "OK" softkey.
A value of 0 is assigned to the selected R parameters or to all R para
m-
eters.