Introduction
2.4 User interface
Turning
62 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Enter the number of the line in which the requi
red character is located.
The line is highlighted in color.
Enter the number of the column in which the required character is l
o-
The character will be briefly highlighted in color and then transferred to
the Character field.
Press the <BACKSPACE> softkey to delete entered phonetic notations.
Press the <input> key to enter the character into the input field.
The input and modification of data in the control system is protected by passwords at
sensitive places.
Access protection via protection levels
The input or modification of data for the following functions depends on the protection level
setting:
● Tool offsets
● Work offsets
● Setting data
● Program creation / program editing
Note
Configuring access levels for softkeys
You have the option of providing softkeys with protection levels or completely hiding
them.
For additional information, please refer to the following documentation:
SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual
To Next Page
Loading...
