Managing programs
13.4 Creating a directory / program / job list / program list
Turning
748 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
You can also enter programs in a program list that are then selected and executed from the
PLC.
The program list may contain up to 100 entries.
fer to the machine manufacturer's specifications.
Select the "Program manage
r" operating area.
Press the menu forward key and the "Program list" softkey.
-list" window opens.
Place the cursor in the desired line (program number).
Press the "Select program" softkey.
The "Programs" window opens. The data tree of the NC memory wit
h
workpiece, part program and subprogram directory is displayed.
he desired program and press the "OK" softkey.
The selected program is inserted in the first line of the list together with
its path.
Enter the program name directly in the list.
If you are making entries manually, check that the path is corre
ct (e.g.
//NC/WKS.DIR/MEINPROGRAMM.WPD/MEINPROGRAMM.MPF).
//NC and the extension (.MPF) may be added automatically.
-channel machines, you can specify in which channel the pro-
To remove a program from the list, place the cursor on the appropr
iate
line and press the "Delete" softkey.
To delete all programs from the program list, press the "Delete all" sof
t-
To Next Page
Loading...
Need help?
General
