Siemens SINUMERIK 828D User Manual

Edit PLC user program (828D only)
24.10 Creating a new block
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
897
24.10
Creating a new block
Create INT blocks to make changes in the PLC user program.
Name
INT _100, INT_101
The number from the selection field "Number of subprogram" is ta
ken
for the name of the INT block.
Author
A maximum of 48 characters is permitted.
Number of subpr
o-
gram
100, 101
Data class
Individual
Comment
A maximum of 100 lines and 4096 characters are permitted.
Note
Access protection
You have the option of protecting blocks that have been newly created against being
accessed.
Procedure
...
1.
The ladder diagram display (LAD) is opened.
2.
Press the "Program block" softkey to open the list of program blocks.
3.
Press the "Ad
d" softkey.
The "Properties" window appears.
4.
Enter author, number of the INT block and, if required, a comment.
The data class of the block is specified.
5.
Press the "OK" softkey to transfer the block to the list.

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English