Chapter
3
Signal
Selection
and
Transitions
Color Matte Settings
You can specify the color matte by luminance, saturation,
and hue values.
Also, in place of a color matte you can use an image
selected on the utility 2 bus.
Notes
•
This transition type is not available for an independent
key transition.
•
In the multi-program mode, you can use a preset color
mix only when selecting the background for the next
transition.
One-stroke mode and one-time mode
•
You can make a setting such that a preset color mix is
carried out in a single transition. This is called “one-
stroke mode.”
When the bus fixed mode is selected with a Setup menu
setting, a preset color mix is always carried out in the one-
stroke mode.
•
You can also make a setting such that when a preset
color mix is completed, the next transition switches to
the previous transition type automatically. This is called
“one-time mode.”
When only the background is changed
Current video
Color matte
New video
Preset color mix (changing background only)
To Next Page
Loading...
