Sony MVS-8000X SystemMVS-7000X System - Setting the AUX MIX Transition Rate

USO RESTRITO
Misc Menu Operations 235
Knob
Parameter
Adjustment
Setting values
2
Transition
Rate
Transition rate
0 to 999
(frames)
Chapter
8
Color
Backgrounds,
Copy
and
Swap,
and
Other
Settings
Notes
When a clip transition is selected as the transition type, it
is not possible to change the transition rate in this menu.
To set the independent key transition rate
By way of example, the following is the procedure for
settings of keys 1 to 4 in the M/E-1 block.
1 Press in the list in the status area of the Misc
>Transition >Key/ME/FTB menu, to select M/E-1.
2 In the <Transition Rate> group, press [Key K1-K4].
To insert (on) or remove (off) keys individually, press
[Key(On) K1-K4] or [Key(Off) K1-K4].
3 Turn the knobs to set the number of frames.
Knob
Parameter
Adjustment
Setting values
1
Key1 Trans
Rate
Key 1 transition
rate
0 to 999
(frames)
2
Key2 Trans
Rate
Key 2 transition
rate
0 to 999
(frames)
3
Key3 Trans
Rate
Key 3 transition
rate
0 to 999
(frames)
4
Key4 Trans
Rate
Key 4 transition
rate
0 to 999
(frames)
To set the fade-to-black transition rate in
the Transition >Key/ME/FTB menu
1 In the Misc >Transition >Key/ME/FTB menu, press
[FTB].
2 Turn the knob to set the number of frames.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
Knob
Parameter
Adjustment
Setting values
1
No
AUX bus
selection
1 to 24
3 Turn the knob to set the number of frames.
Knob
Parameter
Adjustment
Setting values
1
Transition
Rate
Transition rate
0 to 999
(frames)
Setting the AUX Mix Transition Rate
For details of AUX mix transitions, see “AUX Mix
Transitions” (page 119).
1 In the menu control block, press the top menu
selection button [MISC], then select VF3 ‘Transition’
and HF3 ‘Aux Mix.’
The Misc >Transition > Aux Mix menu appears.
2 Use one of the following methods to select the target
AUX bus (odd-numbered bus) in the status area list.
• Directly press the list in the status area.