Sony MVS-8000X SystemMVS-7000X System - Key Border Settings; Art Edge Settings

USO RESTRITO
292
Applying Special Effects (Edge Effects)
Knob
Parameter
Adjustment
Setting values
1
H
Simultane-
ously adjust
width of left
and right key
borders
0.00 to 100.00
2
V
Simultane-
ously adjust
width of top
and bottom
key borders
0.00 to 100.00
3
All
Simultane-
ously adjust
width of all
four key
borders
Value of H shown
4
Soft
Softness of
the key
borders
0.00 to 100.00
5
Density
Density of
the key
borders
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Hue
Hue
359.99 to 0.00
Chapter
11
DME
Operations
Knob
Parameter
Adjustment
Setting values
2
Saturation
Saturation
0.00 to 100.00
a)
3
Hue
Hue
359.99 to 0.00
a)
a) For the All adjustment, the value for Left is shown.
5 To soften the inside of the edges and the boundaries
between adjacent edges, turn on [Edge Soft], and
adjust the following parameters.
Knob
Parameter
Adjustment
Setting values
1
Inner Soft
Softness of
the inside of
edges
0.00 to 100.00
2
Bound Soft
Softness of
the edge
boundaries
0.00 to 100.00
Bound
Soft
Inner Soft
4 To set the key border color, press [Flat Color] and
adjust the following parameters.
Key Border Settings
Notes
The Key Border function is not supported on the MVE-
8000A.
Applying key borders
1 In the DME menu, select VF1 ‘Edge’ and HF3 ‘Key
Border.’
The Key Border menu appears.
2 Press [Key Border], turning it on.
Notes
The key border function and Glow function (see page
310) cannot be turned on at the same time. Only the
one most recently turned on is effective.
3 Set the following parameters.
To select an outline only key
Press [Outline], turning it on.
Art Edge Settings
Notes
The Art Edge function is not supported on the MVE-
8000A.
Applying art edges
1 In the DME menu, select VF1 ‘Edge’ and HF4 ‘Art
Edge.’
The Art Edge menu appears.
2 Press [Art Edge], turning it on.
Notes
The Defocus, Blur, Key Border, and Glow effects
cannot be applied to the Art Edge sections.
3 Set the parameters.