System Maintenance (Maintenance Menu)
Chapter
18
System
Setup
(System)
System Maintenance
(Maintenance Menu)
•
Date and time setting
•
Formatting a memory card
•
Primary settings for USB external storage device
•
Reloading a USB driver
•
Formatting the hard disk
•
Locking setup menu operations
-
For each VF button group, selecting a set of candidate
menus to be locked, then locking all of the candidates
using a password. Except for list scrolling, moving
menus, and similar operations, menu operations for all
settings can be locked.
-
Changing the password
•
Locking file recall operations
-
Locking file recall operations by category
-
Locking and removing the lock using the password
(you can change the password).
To display the Maintenance menu
In the Engineering Setup menu, select VF1 ‘System’ and
HF7 ‘Maintenance.’ In the status area, the current date and
time, and details of the memory card appear.
Setting the Date and Time
1 In the System >Maintenance menu, turn the knobs to
set the following parameters.
Parameter group [1/2]
Using a Memory Card
Displaying memory card information
1
Insert the memory card into the memory card slot.
2
In the <USB Storage Device> group of the System
>Maintenance menu, press [Refresh].
Formatting a memory card
Notes
Format a memory card before using it for the first time.
1
Insert the memory card in the memory card slot.
2
In the System >Maintenance menu, using either of the
following methods, select the USB device.
•
Press directly on the list in the status area.
•
Press the arrow keys to scroll the reverse video
cursor.
3
In the <USB Storage Device> group, press [Format].
A confirmation message appears.
4
To carry out the formatting, press [Yes].
Carrying Out the Primary Setting
To specify a USB device with a storage device connected
as a primary device, use the following procedure.
Parameter group [2/2]
The set date and time appears in the “Set” box in the
status area.
2 Press [Set Date/Time].
This sets the current time to the date and time set in
step 1, and the setting in the “Current” box of the status
area changes accordingly.
Notes
Without this setting, you cannot use the “Memory Card”
item in the File menu to access a memory card on a storage
device connected to the USB device.
1
In the System >Maintenance menu, using any of the
following methods, select the USB device you want to
set as primary.
•
Press directly on the list in the status area.
•
Press the arrow keys to scroll the reverse video
cursor.
•
Turn the knob.
2
In the <USB Storage Device> group, press [Set
Primary].
To Next Page
Loading...
