Cross-Point Settings (Xpt Assign Menu)
Selection of a
function to
assign to the
selected button
Chapter
19
Control
Panel
Setup
(Panel)
5
Press a button to which to assign a function so that the
button is displayed in reverse video.
6
Using any of the following methods, select a desired
function to be assigned in the Button Assign list.
•
Press directly on the desired list.
•
Press the arrow keys to scroll the reverse video
cursor.
•
Turn the knob.
7
Press [Set].
The function selected in step 6 is assigned to the
selected button.
To remove a function assignment
In step 5, select the button whose function assignment you
want to remove, and press [Clear].
To return the function assignments to the factory
default state
Press [Default].
To make the same assignment for all control
blocks on all banks
Press [Copy To All Module].
Cross-Point Settings (Xpt
Assign Menu)
To carry out the cross-point settings, use the Panel >Xpt
Assign menu.
To display the Xpt Assign menu
In the Engineering Setup menu, select VF2 ‘Panel’ and
HF2 ‘Xpt Assign.’
The status area shows a list of “cross-point assign tables”
to use for the M/E banks, PGM/PST bank, and various
buses.
The following functions are available here.
•
Xpt Assign: For each control block or bus, display and
set the assignments to the main table and tables 1 to 14.
You can also carry out settings to link switcher signal
selection to the audio mixer.
•
Main, V/K Pair Assign: Make cross-point settings for
the main table.
-
Assign video/key sources for button numbers 1 to 300.
-
For each table, specify whether the rightmost cross-
point button in each row is used as a shift button, and
the operation mode when it is used as a shift button.
-
For the [SHIFT] button in the cross-point control
block and for each table, select the mode in which this
is a shift button dedicated to the source name displays,
or the mode in which it is a shift button for all buses.
-
Disable cross-point buttons to work.
•
Mixer Xpt Assign: Assign audio mixer cross-points to
cross-point buttons in the main table.
•
Table Button Assign: Create tables 1 to 14 in the same
way as the main table.
•
Src Name: Set source names of up to 16 characters.
•
LCD Color: Set the LCD color for source name display.
•
Table Copy: Copy table contents from the main table to
tables 1 to 14 or between tables 1 to 14 (it is not possible
to copy tables 1 to 14 to the main table).
•
Name Export: This function sends the source name and
destination name to the S-Bus.
•
Side Flags Button Assign: Assign the rightmost button
in the background A/B row to the side flag function
(inserting a selected image on both sides of a 4:3 image).
Creating Cross-Point Assign Tables
As cross-point assign tables, you can create a “main” table
and up to 14 other tables (table 1 to table 14). However,
you can only carry out assignment of the video and key
combinations in the main table.
To Next Page
Loading...
