Macro File Editing Rules 667
Correspondence Between Events and Symbols
For details of events, see “Events” (page 496).
Cross-point selection in the auxiliary bus control block
Cross-point selection in the auxiliary bus control block in router control mode
Cross-point selection in the cross-point control block
Auto transition and take in the transition execution section
Cut in the transition execution section
Transition type selection
Auto transition and take in the independent key transition execution section
Key insertion and deletion in the independent key transition execution
section
Independent key transition type selection
VTR/DDR/clip start point setting
VTR/DDR/clip fast forward
Disk recorder/Extended VTR file recall
Effect execution direction selection (normal)
Effect execution direction selection (reverse)
Effect execution direction selection (normal/reverse on)
Effect execution direction selection (normal/reverse off)
Recall of function assigned to memory recall button/user preference button
Recall of function assigned to the key 2 row cross-point buttons
Frame memory clip loop on/off
Menu macro recall and execution
Recall of frame memory clip
To Next Page
Loading...
