Sony MVS-8000X SystemMVS-7000X System - Keyframe Control Block

USO RESTRITO
Names and Functions of Parts of the Control Panel 51
Name
Description
REC
• When pressed simultaneously with the
[PLAY] button, this button lights red (the
[PLAY] button lights amber), and the image
from the selected device is recorded.
• This button cannot be used for frame
memory clip operations.
Name
Description
ENBL
(enable)
When this is pressed, turning it on, the search
dial [VAR], [JOG], and [SHTL] button
operations are enabled.
VAR
(variable)
Sets the search dial to variable mode.
Chapter
2
Menus
and
Control
Panel
Name
Description
JOG
Sets the search dial to jog mode.
SHTL
(shuttle)
Sets the search dial to shuttle mode.
f External device operation buttons
Pressing the following buttons selects the search dial
mode.
g TIMELINE button
Press to switch the device selected with the device
selection buttons to timeline setting mode.
h STOP button
When pressed, this lights amber, and operation of the
device selected with the device selection buttons stops.
i Search dial
Use this for search and other operations on the material of
an external device.
For details, see “Controlling Tape/Disk Transport” in
Chapter 12 (Volume 2).
Keyframe Control Block
In the keyframe control block, you can carry out effect
editing and execution.
0 EFF LOOP button
1 EDIT ENBL button
9 STOP NEXT KF button
4 Duration setting buttons
qa AUTO INS button
8 Effect execution
direction selection
buttons
5 KF LOOP button
6 PAUSE button
7 Effect execution
section
2 Edit point
specification buttons
3 Editing buttons
a EDIT ENBL (edit enable) button
Press this button, turning it on, to enable effect editing
operations with the keyframe control block.
When macro editing is carried out, this button lights red.
b Edit point specification buttons
The following buttons are used to set an edit point.