Sony MVS-8000X SystemMVS-7000X System - Glow Settings; Mask Settings

USO RESTRITO
310
Applying Special Effects (Effects on the Overall Video Signal)
Knob
Parameter
Adjustment
Setting values
1
Clip
Reference
level for
highlight
detection
0.00 to 100.00
2
Gain
Amount of
gain for
highlights
–100.00 to +100.00
3
Soft
Softness
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Hue
Hue
359.99 to 0.00
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Hue
Hue
359.99 to 0.00
Knob
Parameter
Adjustment
Setting values
1
Start
Point where
fading starts
(fade start
point)
–100.00 to +100.00
2
Gain
Degree of
fading
0.00 to 100.00
Chapter
11
DME
Operations
Knob
Parameter
Adjustment
Setting values
2
Gain
Degree of
dimming
0.00 to 100.00
4 Press [Flat Color] and set the parameters for the color
of the depths of the picture.
4 Press [Matte] and set the glow color.
Applying the Fade effect
1 In the DME menu, select VF7 ‘Enhanced Video
Modify’ and HF3 ‘Dim & Fade.’
The Dim & Fade menu appears.
2 Press [Fade], turning it on.
3 Set the parameters.
Inverting the highlight areas
Press [Glow Invert], turning it on.
The highlight and non-highlight areas are inverted.
Masking the Glow effect with a selected
pattern
Press [Mask] to display the Mask menu and set the type of
pattern and modifiers (see page 310).
Glow Settings
Applying the Glow effect
1 In the DME menu, select VF7 ‘Enhanced Video
Modify’ and HF4 ‘Glow.’
The Glow menu appears.
2 Press [Glow], turning it on.
Notes
• On the MVE-9000 and MVS-7470X/7471X, the key
border function and Glow function cannot be turned
on at the same time. The function most recently
turned on is effective.
• On the MVE-8000A, the Defocus and Glow effects
or the Blur and Glow effects cannot be turned on at
the same time. The effect most recently turned on is
effective.
3 Set the parameters.
Notes
When the signal format is 1080P on the MKS-7470X/
7471X, masking will cause the edges to get blurred.
Mask Settings
Applying masks
1 In the DME menu, select VF2 ‘Video Modify’ and
HF7 ‘Mask.’
The Mask menu appears.
2 In the <Mask> group, press the button for the group of
the effect to which you want to apply the mask, turning
it on.
Effect Gp 1: Posterization, Solarization, Nega, Sepia,
Mono, Contrast, Mosaic, Sketch, Metal
Effect Gp 2: Defocus, Blur, Glow
Notes
On the MVE-8000A, Effect Gp 1 and Effect Gp 2
cannot be turned on at the same time.