Sony MVS-8000X SystemMVS-7000X System - Using Keys 5 to 8; Assigning Buttons for Selection of Keys 5 to 8 in the Setup Menu

USO RESTRITO
Using Keys 5 to 8 397
Appendix
(Volume
1)
Using Keys 5 to 8
Notes
Keys 5 to 8 cannot be used when the signal format is
1080P.
Assigning Buttons for Selection of Keys 5 to 8 in the Setup Menu
In the factory defaults for this system, keys 5 to 8 are not
assigned to buttons on the control panel.
To select keys 5 to 8, assign buttons in the Setup menu according to the following table.
Control block
Button
Menu number
Reference in User Guide
“Control Panel Setup (Panel)” and “Cross-Point Settings (Xpt
Assign Menu)” in Chapter 19 (Volume 2)
Transition control
block
Next transition
selection buttons
7321.9
“Setting Transition Control Block Button Assignments”
Engineering Setup >Panel >Config >Link/Program Button
>Transition Module1 menu
Cross-point control
block
SHIFT button
7322.1
“Creating Cross-Point Assign Tables” “Setting the action of the
[SHIFT] button in the cross-point control block”
Engineering Setup >Panel >Xpt Assign >Table Button Assign
menu
Key Control Block
Delegation button
7321.29
“Assigning Functions to Key Control Block Buttons”
Engineering Setup >Panel >Config >Link/Program Button >Key
Control Module >Button Assign menu
Transition control
block (standard
type)
Key delegation
buttons
7321.33
“Setting Transition Control Block Button Assignments”
Engineering Setup >Panel >Config >Link/Program Button
>Transition Module2 menu
Independent key
transition execution
section
7321.34
“Setting Transition Control Block Button Assignments”
Engineering Setup >Panel >Config >Link/Program Button
>Transition Module3 menu
Independent key
transition control
block
Entire block
7321.15
“Assigning Keys to the Independent Key Transition Control
Block (Simple Type)”
Engineering Setup >Panel >Config >Compact Key Module
Assign menu
Downstream key
control block
Key delegation
buttons
7321.1
“Assigning the Key Delegation in the Downstream Key Control
Block”
Engineering Setup >Panel >Config >DSK Fader Assign menu
Downstream key/
fade-to-black control
block
Key delegation
buttons
7321.14
“Assigning Keys to the DSK1 and DSK2 Buttons in the
Downstream Key/Fade-to-Black Control Block”
Engineering Setup >Panel >Config >Link/Program Button
>DSK/FTB Module menu
Device control block
(joystick)
Operating buttons
7321.31
“Selecting the Module to be the Reference for Device Control
Block”
Menu Engineering Setup >Panel >Config >JS/TB User Setting
menu
Device control block
(trackball)
Cross-point control
block
Key 1 row
7326.13
“Assigning the key/AUX bus delegation function to the key 1
row”
Engineering Setup >Panel >Operation >Key Row Operation
>Key Deleg/AUX Assign menu