Sony MVS-8000X SystemMVS-7000X System - Control Panel: Example Configuration 3 (with Compact Transition Modules); Cross-Point Control Block

USO RESTRITO
32
Names and Functions of Parts of the Control Panel
Chapter
2
Menus
and
Control
Panel
Control Panel: Example Configuration 3 (With Compact Transition Modules)
The following illustration shows a typical configuration,
with compact transition modules used in the transition
control block.
Transition control block (compact type) (page 68)
Control panel configuration 3 (with compact transition modules)
Cross-Point Control Block
In the cross-point control block, you can select the signals
to be used in this M/E bank or PGM/PST bank.
There are also modules without the source name displays
shown in the following figure.
All operations except those of the [SHIFT] button are the
same as for a module with source name displays.
Notes
In the case of the MVS-8000X, only the premium inputs
(inputs to the switcher premium input connectors 1 to 20)
can be selected as key signals on the M/E-4 bank.