Sony MVS-8000X SystemMVS-7000X System - Multi Move Settings

USO RESTRITO
Applying Special Effects (Effects on the Overall Video Signal) 305
Knob
Parameter
Adjustment
Setting values
2
V
Vertical
defocusing of
video and
key signals
0.00 to 100.00
3
All
Horizontal
and vertical
defocusing of
video and
key signals
H value shown
Knob
Parameter
Adjustment
Setting values
1
H
Horizontal
defocusing of
key signal
0.00 to 100.00
2
V
Vertical
defocusing of
key signal
0.00 to 100.00
3
All
Horizontal
and vertical
defocusing of
key signal
H value shown
Knob
Parameter
Adjustment
Settings values
1
V/K H
Horizontal
defocusing of
video and
key signals
Video H value
shown
2
V/K V
Vertical
defocusing of
video and
key signals
Video V value
shown
3
V/K All
Horizontal
and vertical
defocusing of
video and
key signals
Video H value
shown
4
Video All
Horizontal
and vertical
defocusing of
video signal
Video H value
shown
5
Key All
Horizontal
and vertical
defocusing of
key signal
Key H value shown
Knob
Parameter
Adjustment
Settings values
1
Video H
Horizontal
defocusing of
video signal
0.00 to 100.00
2
Video V
Vertical
defocusing of
video signal
0.00 to 100.00
3
Key H
Horizontal
defocusing of
key signal
0.00 to 100.00
4
Key V
Vertical
defocusing of
key signal
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Center X
X-value of
shrinking
center point
–4.00 to +4.00 (SD)
–12.00 to +12.00
(HD)
2
Center Y
Y-value of
shrinking
center point
–3.00 to +3.00 (SD)
–9.00 to +9.00 (HD)
3
Size
Shrinking
ratio
0.00 to 100.00
Chapter
11
DME
Operations
Knob
Parameter
Adjustment
Settings values
2
V
Vertical
defocusing of
video signal
0.00 to 100.00
3
All
Horizontal
and vertical
defocusing of
video signal
H value shown
When Video/Key is selected (with SDI-interfaced
DME)
When Key is selected (with SDI-interfaced DME)
Parameter group [1/2]
Masking the Blur effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 310).
Multi Move Settings
Parameter group [2/2]
Applying the Multi Move effect
1 In the DME menu, select VF2 ‘Video Modify’ and
HF2 ‘Multi Move.’
The Multi Move menu appears.
2 Press [Multi Move], turning it on.
3 Set the parameters.
The valid ranges of the parameter values depend on the
combination of signal format (SD/HD) and aspect
ratio (4:3/16:9) selected in the system, as follows.
4:3 mode
When video is selected (with SDI-interfaced DME)
Knob
Parameter
Adjustment
Settings values
1
H
Horizontal
defocusing of
video signal
0.00 to 100.00