2
Press the group name button.
3
Press the button to which the menu macro is assigned.
To stop a menu macro during execution
Press [MenuMacro Stop].
Menu Macro Creation and Editing
Create or edit menu macro registers.
Notes
It is not possible to execute a menu macro during editing.
To run the macro, first press [Store] to end editing.
Creating a new menu macro
1
In the Macro >Menu Macro Register >Recall & Run
menu, select an empty register in the menu macro
register list.
For details of the method of operation, see “Recalling
a menu macro register” (page 522).
2
Press [Menu Macro Edit].
The menu macro register is recalled, and the system is
now in menu macro editing mode.
The Menu Macro Edit menu appears.
4
Create an event (carry out the menu operation you
want to record as an event in the menu macro).
For details of menus that can be recorded, see page
522.
•
When auto insert mode is on, carrying out a menu
operation automatically saves the event in a menu
macro.
•
When auto insert mode is off, skip to step 5.
5
When auto insert mode is off, press [Insert Before] or
[Insert After] to save the event.
6
Repeat steps 4 and 5, to record the required events in
the menu macro.
7
Turn the knob to input the event execution interval.
This value can be set for each menu macro register.
8
Press [Store].
The numeric keypad window appears.
9
Enter the menu macro register number as required, and
press [Enter].
The menu macro is saved with the specified number.
Menu macro register
number
Event number
Menu macro register
configuration list
The menu returns to the state in step 1.
Menu macro
register name
Remaining Memory
To set a pause duration
During menu macro editing, use the following procedure.
1 Enter the pause duration by turning the knob.
Menu macro creation event list
3 If required, press [Auto Insert] to switch the auto insert
mode on or off.
In the auto insert mode, when you carry out a menu
operation, this is automatically recorded as an event in
the menu macro.
2 Press [Pause Set].
•
When auto insert mode is on, this sets the pause
duration, and inserts the pause event.
•
When auto insert mode is off, use the same
operations as in step 5 of “Creating a new menu
macro” (page 524) to save the event.
Editing a menu macro
To edit the content of a menu macro, use the following
procedure.
To Next Page
Loading...
