Sony MVS-8000X SystemMVS-7000X System - Nega Settings; Contrast Settings; Mosaic Settings; Sketch Settings

USO RESTRITO
Applying Special Effects (Effects on the Overall Video Signal) 307
Knob
Parameter
Adjustment
Setting values
1
Y Clip
Luminance
clip level
+109.59 to –7.31
2
Y Gain
Luminance
contrast
gradient
–100.00 to +100.00
3
Y Offset
Luminance
offset level
increment
–100.00 to +100.00
4
C Gain
Chroma
contrast
gradient
–100.00 to +100.00
Chapter
11
DME
Operations
Masking the Posterization or Solarization
effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 310).
Video output level
Video output level
Nega Settings
Applying the Nega effect
Video input level
Clip, Gain, Offset
Video input level
1 In the DME menu, select VF2 ‘Video Modify’ and
HF3 ‘Color Modify.’
The Color Modify menu appears.
2 Press [Nega Y] or [Nega C], turning it on, or press both
buttons, turning them on.
Nega Y: Reverse the luminance.
Nega C: Reverse the chroma.
Masking the Nega effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 310).
Contrast Settings
Applying the Contrast effect
1 In the DME menu, select VF2 ‘Video Modify’ and
HF3 ‘Color Modify.’
The Color Modify menu appears.
2 Press [Contrast], turning it on.
3 Set the parameters.
Masking the Contrast effect with a
selected pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 310).
Mosaic Settings
Applying the Mosaic effect
1 In the DME menu, select VF2 ‘Video Modify’ and
HF4 ‘Mosaic.’
The Mosaic menu appears.
2 Press [Mosaic], turning it on.
3 Set the following parameters.
Knob
Parameter
Adjustment
Setting values
1
Size
Size of tiles
0.00 to 100.00
2
Aspect
Aspect ratio
of tiles
–100.00 to
+100.00
a)
a) Specify minus values to stretch the tiles in the vertical direction, and
plus values to stretch the tiles in the horizontal direction.
Masking the Mosaic effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 310).
Sketch Settings
Applying the Sketch effect
1 In the DME menu, select VF7 ‘Enhanced Video
Modify’ and HF1 ‘Sketch.’
The Sketch menu appears.
2 Press [Sketch], turning it on.