System Maintenance (Maintenance Menu)
Chapter
18
System
Setup
(System)
1
In the System >Maintenance >Setup Operation Lock
menu, press [Lock].
A keyboard window appears.
2
Enter the password.
If the password is correct, the lock is released, and the
padlock icon disappears.
VF button
Changing the lock password
1
In the System >Maintenance >Setup Operation Lock
menu, press [Change Password].
A confirmation message appears.
2
Press [Yes].
A keyboard window labeled “Old Password” appears.
Lock Item Select button
HF button
3
Enter the old password, and press [Enter].
If the password is correct, a keyboard window labeled
“New Password” appears.
4
Enter the new password, and press [Enter].
A keyboard window labeled “New Password
(Confirm)” appears.
5
Enter the new password once more for confirmation,
and press [Enter].
If the password is correct, the password change
completed message appears.
6
Press [OK].
[Lock Item Select] turns red, and a padlock icon appears.
This selection is reflected in the lock candidate list in the
Setup Operation Lock menu.
Notes
If there are already one or more locked menus, selection of
lock candidates is not possible.
In this case, the indication of [Lock Item Select] changes
as follows.
Selecting an opened setup menu for
When the displayed
menu is locked
When a menu other
than the displayed
menu is locked
locking
With the menu you want to lock open, press [Lock Item
Select] at the lower left.
If you want to select lock candidates, first remove the lock
in the Setup Operation Lock menu.
Locking File Loading Operations
You can inhibit load operations for a specified file
category.
1 In the System >Maintenance menu, press [File Load
Lock].
The File Load Lock menu appears.
The status area shows a list of file category numbers,
category names, and the lock status.
Subsequent lock operations apply to the category
selected here.
To Next Page
Loading...
