Sony MVS-8000X SystemMVS-7000X System - Volume

USO RESTRITO
Functional Differences With Models of DME 411
Function
Menu number
MVE-8000A
MVE-9000
MKS-7470X/7471X
See
Adding user texture
patterns (for Spotlighting)
7316.9
No
Yes
Yes
“Adding User
Texture
Patterns” in
Chapter 18
(Volume 2)
Setting AUX bus output/
reentry input
7337.7
It is not possible to
make settings for
DME 1 to 8 Ext In.
It is not possible to
make settings for
DME 1 to 8 Ext In.
It is not possible to
make settings for
DME 1 to 8 Ext In.
“Setting the
AUX Bus
Output and
Reentry Input”
in Chapter 20
(Volume 2)
TBC window center
position (Video/Key)
7341.1
Yes only when SDI
interface is used.
Yes only when SDI
interface is used.
No
“Setting the
TBC Window
Center Position”
in Chapter 21
(Volume 2)
TBC window center
position (Ext In)
No
Yes
Yes
“Setting the
TBC Window
Center Position”
in Chapter 21
(Volume 2)
Adjustment of monitor
output video clip level
7343
Yes only when SDI
interface is used.
Yes only when SDI
interface is used.
No
“Adjusting the
DME1 and
DME2 Output
Video Clip
Levels” in
Chapter 21
(Volume 2)
Settings relating to usage
of editor port
7344
Yes
Yes
No
“Interfacing
With External
Devices
(Device
Interface
Menu)” in
Chapter 19
(Volume 2)
1080P supported
7313.1
Yes
No
Yes
“Setting the
Signal Format
(Format Menu)”
in Chapter 18
(Volume 2)
Appendix
(Volume
1)
a) [External] cannot be selected in the <Flex Shadow Source> group or [Ext
Video] cannot be selected in the <Flex Shadow Fill> group.
b) Effect groups 1 and 2 cannot be selected at the same time. Pattern 304
(Round Corner) is not supported.