Sony MVS-8000X SystemMVS-7000X System - Setup

USO RESTRITO
Setup 29
Chapter
1
MVS-8000X/7000X
Functions
Setup
Various settings are required, in order to operate the
switcher, control panel, DME, external devices, and so on,
connected together in a single system.
This is referred to as “setup,” and you can carry out the
setup operations from the Engineering Setup menu.
The settings in the Engineering Setup menu are grouped
under the following headings.
System setup (System)
For details, see Chapter 18 “System Setup” (Volume 2).
Panel setup (Panel)
For details, see Chapter 19 “Control Panel Setup
(Panel)” (Volume 2).
Switcher setup (Switcher)
For details, see Chapter 20 “Switcher Setup (Switcher)”
(Volume 2).
DME setup (DME)
For details, see Chapter 21 “DME Setup (DME)” (Volume
2).
DCU setup (DCU)
For details, see Chapter 22 “DCU Setup (DCU)” (Volume
2).
Router/tally setup (Router/Tally)
For details, see Chapter 23 “Setup Relating to Router
Interface and Tally (Router/Tally)” (Volume 2).
User setup (User Setup)
For details, see Chapter 24 “User Setup (User Setup)”
(Volume 2).