Sony MVS-8000X SystemMVS-7000X System - Assigning a Function to the Independent Key Transition Control Block (Simple Type)

USO RESTRITO
Overall Control Panel Settings (Config Menu) 579
Function
Button indication
Set range
FROM TO
Go to specified event
GOTO EVNT
Function
Button indication
Undo
UNDO
Pause setting
PAUS
Copy
COPY
Paste
PSTE
Select all
ALL
Insert
INS
Modify
MOD
Delete
DEL
Keyframe loop count
setting
KF LOOP
Effect duration setting
EFF DUR
Keyframe duration setting
KF DUR
Delay setting
DLY
Constant duration mode
on or off
CNST DUR
Go to specified timecode
GOTO TC
Go to specified keyframe
GOTO KF
Set range
FROM TO
Return the button display
to that before effect was
executed
EXIT
Switch to numeric keypad
input mode
STOR
Go to first keyframe
REWIND
Switch to shifted functions
SHFT
Go to previous keyframe
<< PREV
Go to next keyframe
>> NEXT
Execute effect
RUN
Function
Button indication
Undo
UNDO
Pause setting
PAUS
Auto insert mode on or off
AUTO INS
Copy
COPY
Paste
PSTE
Select all
ALL
Insert
INS
Modify
MOD
Delete
DEL
1
In the Panel >Config menu, press [Link/Program
Button].
The Link/Program Button menu appears.
2
Press [Compact Key Trans Module].
The Compact Key Transition Module menu appears.
3
In the <Bank Select> group, select the bank you want
to manipulate.
4
According to the selected bank, select the control
block to be assigned, in the <Module Select> group.
The currently assigned function is displayed in the
area that displays the buttons in the selected control
block.
Chapter
19
Control
Panel
Setup
(Panel)
Buttons in the memory recall section during effect
editing
6 Press [Set] to confirm the setting.
To cancel an assignment
Select the button, then press [Clear].
To return all button assignments to the factory default
state, press [Default].
Assigning a Function to the
Independent Key Transition Control
Block (Simple Type)
You can assign a function to the buttons in the independent
key transition control block (simple type).
The assignment may be to the independent key transition
type selection buttons and buttons in the independent key
transition execution section.
The functions of the buttons in the memory recall
section during effect editing are on two pages; to set
the functions of buttons on the second page, press [2]
in the <Page Select> group in the button area.
Buttons in the memory recall section during macro
editing
The functions currently
assigned to the buttons in the
selected control block appear.
Button Assign list
(Assignable functions
are displayed)